A Highly-Effecient, Revolutionary Airbrush Designed for a Spray Tan in Half the Time

The TurboAir airbrush is a revolutionary airbrush designed for the needs of airbrush tanning. It is nearly twice as fast as the typical airbrush used for tanning.

It is highly efficient -- it can be used with just about any compressor no matter how small (unlike most spray guns which require big compressors with at least a 2 cubic feet per minute flow rate).

The TurboAir achieves its high throughput with near perfect atomization -- you get great speed with no loss in quality.

Directions:
Adjust air pressure to 15-20 PSI for optimum performance. Hold the TurboAir airbrush slightly further away from the client than a normal airbrush -- about 12-15 inches. Also, work more quickly with the airbrush since it has greater throughput.

The adjustment knob on the back of the airbrush determines how far you can pull the trigger back. Turning counterclockwise, allows the trigger to be pulled back further -- increasing fluid flow. Turning clockwise restricts the range of the trigger and limits the fluid flow.

Together, Pressure and fluid flow determine atomization.

Adjust your compressor to the desired pressure with the trigger pulled back fully. Once the proper pressure is attained, adjust the airbrush knob so the the desired atomization appears with the trigger fully retracted.

More Information:
TurboAir TurboSpeed Operation Video Guide
TurboAir TurboSpeed Maintenance Video Guide